1. Locate the “Nozzle” on your cartridge.
2. Connect the cannula needle to the syringe and fill with ink.
3. Inject about 10-15 ml. of ink into the cartridge or until the ink chamber is full. If you feel
a little pressure, pull back on the syringe handle to pull some air out, and then continue
filling (repeat this process as needed).
4. Once finished, pull back on the sryinge handle a little while its still in the nozzle, to help
prime the cartridge and get it ready to use.
5. Remove the syringe from the cartridge, rinse it with water and dry for future use, or use
with a different color ink.
6. Reinsert the cartridge and run a priming cycle as per printer instructions.
Note: You may want to refer to your printer manual to turn off usage information. This
allows you to continue using your newly refilled cartridge.
Please click here to download attachment link
Please click here to download attachment link